Mc-techgroup CSS-V2 Operator's manual Manuel d'utilisateur télécharger pdf (Page 15)

4-1.2-ME Gas sampling and gas conditioning technology 15

11.1 RETROFITTING OF THE WALL MOUNTING HOUSING TO A 19“-HOUSING

The gas conditioning units CSS-V.. are delivered with a wall mounting housing.

If a 19”-housing is needed, the gas conditioning unit can be backfitted very easy by installing the

mounting brackets from the back to the front:

 Dismount the two fixing screws at each mounting bracket

 Adjust the mounting bracket with 19“-bore holes forward-turned

 Fix the mounting bracket flush with the front panel at the housing by using the two fixing

screws

12 SUPPLY CONNECTIONS

12.1 HOSE CONNECTIONS

Figure 5 Hose connections CSS-V

NOTE!

Do not mix up the hose connections.

After having connected all lines, please check the seals.

Contrary to figure 4 execution CSS-V2 has two sample gas outlets.

The condensate connections are carried out directly at the peristaltic pump.

All hose connections are DN4/6mm sealing ring threaded hose couplings out of PVDF/PPH as

standard. They are suitable for gas inlet temperatures of maximum 80°C (see chapter 8).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Pas de commentaire

Mc-techgroup CSS-V2 Operator's manual Manuel d'utilisateur Page 15