Mc-techgroup CSS Series Operator's manual Manuel d'utilisateur télécharger pdf (Page 28)

Gas sampling and gas conditioning technology 4-1.1-ME

16 SUPPLY CONNECTIONS

16.1 HOSE CONNECTION

NOTE!

The CSS is equipped with G1/4“i connections.

Do not mix up the hose connections: they are clearly marked. Af-

ter all the hoses have been connected, the tightness of such leads

should be checked.

Connection hoses with dimensions DN 4/6mm are utilised for all models.

The following lines have to be connected (Fig. 5):

 sample gas line to connection (C) respectively to connection (M), operating with version CSS-2

(second independent gas flow);

 zero gas line to connection (F);

 span gas line to connection (G);

 line -test gas to sample gas probe (CSS.../C)- to connection (I);

 analyser(s) to outlets (D) and (E); maximum two sample gas outlets are available; with version

CSS-2 an additional sample gas outlet (K) is available;

 connect the condensate hose to the outlet (H) respectively to the outlet (L), operating with version

CSS-2 ( second independent gas flow); the hose must be laid with slope to a ventilated sewer or

reservoir; it is absolutely necessary to install the ventilation outside the analysers cabinet and ana-

lysers house;

NOTE!

The tightness of the connections can only be guaranteed if the

connecting hose has a straight rim (hose cutter).

W A R NIN G !

Aggressive condensate is possible. Wear protective glasses and

proper protective clothing!

16.2 ELECTRICAL CONNECTIONS

W A R NIN G !

False supply voltage can demage the equipment. When connect-

ing the equipment, please ensure that the supply voltage is iden-

tical with the information provided on the model type plate!

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

Pas de commentaire

Mc-techgroup CSS Series Operator's manual Manuel d'utilisateur Page 28